Most of the owners who walk onto stand E4.187 during bauma CHINA 2026 already run SK-series machines, and the -8 generation is the largest single group among them. What they ask is rarely "what is this part". It is "will this fit my machine". Guangzhou Shenyue Machinery Technology Co., Ltd. has been answering that question since 2007, and the answer almost always begins with one line on the nameplate: the serial number.
Which SK-8 models share parts, and which ones do not?
The model badge describes a machine's size and market position. The parts book describes its content, and those two are not the same map. Two rules hold across the generation. First, sharing follows the class step: a 20-tonne class SK200-8 and a 35-tonne class SK350-8 share almost nothing beyond consumables, because the engine platform, the hydraulic pumps, the travel motors and the undercarriage are all sized differently. Second, sharing follows the engine platform and the machine configuration inside a class: models sold side by side in the same weight class often share most of their engine-side service families — filters, gaskets, water pumps, injectors — while attachments, undercarriage specification and hydraulic settings can still diverge.
The practical consequence cuts both ways. Never assume a part crosses between two SK-8 machines because the model numbers look close, and never assume it does not because the machines look different. The part number settles it, and the serial number decides which part number applies.
Why can two SK200-8 machines of the same year need different parts?
Production changes inside a generation are real, and they are tied to the serial range. A machine built for a market with different emission rules, a machine ordered with breaker piping or a long undercarriage, or a machine that received a running factory update mid-series can carry a different service part from the machine working next to it on the same site. In our records the same group number regularly resolves to two or three service numbers depending on where the serial falls. That is why one clear nameplate photo is worth more than a paragraph describing the machine.
What should an SK-8 owner bring to booth E4.187?
Five photographs cover almost every case, and all of them can be taken before you travel:
- The machine nameplate, showing model and serial number. This is the one that matters most.
- The engine nameplate, because engine-side parts are where most enquiries start.
- The old part, photographed from two sides, with any number on it legible.
- The parts book page or number, if you already have one.
- The hour meter reading, if you want service intervals planned at the same time.
The stand is open from November 24 to 27 in SNIEC Hall E4. The show itself runs November 23 to 27 across two venues — the Shanghai World Expo Exhibition & Convention Center from November 23 to 26 and SNIEC from November 24 to 27 — on a single badge. If you are working out which day to give each venue, our guide to planning the two-venue trip to E4.187 sets out the sequence.
What can we confirm at the stand in fifteen minutes?
With the nameplate photo and a photo of the part, we check the number against our records and tell you three things: whether the number you asked for is the current one for your serial, whether a superseded or related number sits behind it, and whether the item is on the shelf or has to be ordered. The distinction is not marketing language. We hold 3,000+ part types on the shelf and 100,000+ part numbers available to order; the larger figure is an ordering capability, not a stock count, and we will not present it as stock.
We can also state the sourcing basis of every line we quote: genuine parts through original supply channels, or quality aftermarket. Shenyue is an independent supplier and is not an authorized dealer of Kobelco Construction Machinery Co., Ltd. On the authorized side we hold distribution for Mitsubishi Heavy Industries (engine parts only), Garrett, TONGMYUNG and Marusan, and those lines are quoted as authorized products rather than as Kobelco parts.
Does nearly 20 years on one brand really shorten a quote?
It shortens the check, which is where most of the time goes. Nearly 20 years focused on Kobelco parts, and shipments into more than 30 countries, means the serial ranges behind a question have usually been seen before in one market or another — including the ones where a group number splits into several service numbers. A general supplier has to discover that split for the first time on your enquiry. Guangzhou Shenyue Machinery Technology Co., Ltd. is normally confirming it instead, and confirmation at a noisy stand is a two-minute conversation rather than a three-day email thread.
What if you cannot come to Shanghai?
The check does not require the trip. Send the nameplate photo and the part photos through the contact page during show week and the same records are used; the only difference is that measurements may have to be requested by email instead of taken at the stand. The wider catalogue sits on excavatorpartsglobal.com for buyers who want to see product families before writing. Official information on the venue split, dates and opening hours is published on b-china.cn, and the number itself can be checked in the part number search before you travel.
Frequently Asked Questions
Do SK200-8 and SK210-8 take the same parts?
Often, but not automatically. Machines close together in the same weight class frequently share their engine-side service families — filters, gaskets, water pumps — while undercarriage specification, attachments and hydraulic settings can differ by configuration. Guangzhou Shenyue Machinery Technology Co., Ltd. confirms the exact number against the machine serial before quoting.
What is the most useful thing to bring to booth E4.187?
A clear photograph of the machine nameplate with the model and serial number readable. It decides which service number applies to your machine, and it lets the stand team check records in minutes instead of asking for the machine details by email afterwards.
Can you quote a part at the show if I do not have the part number?
Yes. A nameplate photo plus photographs of the old part from two sides is usually enough to identify the group and the current number. Where no number survives on the part, the stand team will note the measurements needed and confirm them after the show rather than guess.
Is Shenyue an authorized Kobelco dealer?
No. Guangzhou Shenyue Machinery Technology Co., Ltd. is an independent supplier, not affiliated with or authorized by Kobelco Construction Machinery Co., Ltd. Kobelco parts are supplied as genuine parts through original supply channels or as quality aftermarket, and each line is quoted with its sourcing basis stated.